High Pressure Coolant Systems

High-pressure coolant is an exceptional tool for performing deep hole operations such as gun-drilling and boring. Properly applied, high-pressure coolant is an effective solution for all chip control problems.

Direct high-pressure coolant can either break or control the chip away from the tool and workpiece thereby increasing tool life and improving finishes.

Cycle time for drilling can be reduced 40 - 70% with direct high- pressure coolant. The material is less likely to work harder, making drilling easier and in many cases eliminating the need for peck drilling cycles!

  • High-speed Drilling Operations
  • Chip Control For Turning And Grooving Improved Surface Finish
  • Increased Tool Life
  • Reduced Cycle Time
  • Greater Throughput

5 Line System for Cincom Machine
Model CB105V


Features:

  • Coolant is continuously filtered through 5 micron filter
  • 5 independent high pressure coolant lines
  • Washable air inlet filter
  • Space saving vertical design: 19.5" W x 51.4" L x 43.4" H

5 & 10 Line Systems with Heat Exchanger for Cincom Machines
Model CB510 Available in Horizontal and Vertical Designs


Specifications:

  • 2,000 PSI, 6.5 GPM
  • 7.5 HP
  • 5 micron filtration
  • Heat exchange system
  • PLC control integration
  • Electrical interface harness
  • Installation kit (HP hoses, fittings, manifold blocks for coolant distribution)
  • Diagnostic indicator lights
  • Restricted filter automatic shut off
  • Voltage: 200/230V 40.0 full load amps (optional 440/480V 30.0 full load amps)

Features:

  • 2,000 CFM heat exchange system standard
  • Vertical or horizontal design
  • Available in 5 or 10 independent high pressure lines

Dual Filter High Pressure Coolant System for Cincom Machines
Model CB610V 10 Line System with Heat Exchanger


The CB610 dual filter system is designed to automatically change-over to the secondary filter when the primary filter becomes clogged. The filter change-over will not stop production, therefore unattended or third shift operations can continue without disruption.

Features:

  • Automatic change over from clogged filter to clean filter occurs without loss of production
  • Air purge system automatically removes coolant from clogged filter canister
  • Washable air inlet filter provides clean air flow for heat exchange system
  • Space saving vertical design: 19.5" x 51.4" x 43.4"

Specifications:

  • 2,000 PSI, 6.5 GPM
  • 7.5 HP
  • 5 micron filtration
  • Heat exchange system
  • PLC control integration
  • Electrical interface harness
  • 10 independent high pressure coolant lines
  • Installation kit (HP hoses, fittings, manifold blocks for coolant distribution)
  • Diagnostic indicator lights
  • Voltage: 200/230V 40.0 full load amps (optional 440/480V 30.0 full load amps)
High Pressure Coolant Systems for MIYANO Machines

High Pressure Coolant Systems for MIYANO Machines
Model CB101VM


Features:

  • 5 micron filtration
  • Single high pressure coolant line
  • Washable air inlet filter
  • Space saving vertical design 19.5” W x 51.4” L x 43.4” H
High Pressure Coolant Systems for MIYANO Machines

High Pressure Coolant Systems for MIYANO Machines
Model CB103VM


Features:

  • 3 independent high pressure coolant lines
  • 2,000 CFM heat exchanger
  • Washable air inlet filter
  • Space saving vertical design
  • 19.5” W x 51.4” L x 43.4” H