Marubeni Citzen-Cincom, Inc.
Products
Service, Training and Support
Sales
Applications and Information
About MCC
Request Information
Home

Cincom C16 VI/VII/IX

Making the Connection Between B Speed and L Versatility

Modular Design & 100% Servo Control

  • Fewer moving parts reduce downtime and maintenance
  • Eliminates vibration for greater accuracy and tool life
  • Faster rapid traverses, spindle speeds and tool indexing
  • Less floor space

Combines Speed & Versatility

  • Seven programmable axes standard
  • Main and back spindles
  • 1° C axis on main and back spindles optional
  • Up to 22 live and stationary tools

FEATURES:

Synchronized-Superimposed Operation
Cincom Online

Download the Cincom C16 brochure: C16.pdf (517 KB)

Cincom C16 VII

System M6 NC Controller
Axis Movement
Specifications
Typical Parts
Space-Saving Design
Special Tooling
TOPCincom System M6 NC Controller
Standard features Options
10.4" color liquid crystal display
Corner chamfer/round function
On-machine program check
3-dimensional interference check
Constant surface speed control
Auto power-off function
... and more		 C-axis (main and back)
Synchronous tapping
Spindle synchronization control
Sub-inch designation
Milling interpolation
Canned cycle for drilling
Tool life management
TOPAxis Movement
4 axis control
X1, Y1, Z1, and Z3

6 turning tools

3 live tools

4 front/back I.D. tools

With the absence of the center tool block the new C16VI is the perfect machine for simple parts and shaft work. Thus making the C16VI our most economical Cincom model in our C series line.

7 Simultaneously controlled
X1, Y1, Z1, X2, Z3, A1, A2

2 Optionally available
C1, C2

Type VII is the basic model of the C-Series. It can perform front drilling and back drilling, or front machining and back machining simultaneously.

The “X + Z axis control modules” have been added to the opposite tool post and sub spindle respectively in the C16IX. Combination of the radial tool post, which is common to the C-series models, and the opposite tool post’s of 2-axes control improves simultaneous machining performance. The combination enables simultaneous machining (3-axes superimpose) of “front drilling – outer diameter machining – back drilling.”
Machine Specifications
Max. part diameter 5/8"
Part length/chucking 7.87"
Main spindle speed 200-10,000 rpm
Rotary tool spindle speed 200-8,000 rpm
Back tool spindle speed 200-10,000 rpm
Max. tool capacity VI VII IX
Turning tools on the gang tool post 6 6 6
Rotary tools on the gang tool post 3 4 4
Front drilling tool 4 6 6
Back drilling tool 4 6 6
Motors
Main spindle 2/3 hp
Tool spindle 1 hp
Back spindle 5/1 hp
Coolant 3 hp

TOPTypical Parts

For parts up to 5/8" diameter x 7.87" long per chucking.

  • Contouring
  • Threading
  • Milling
  • Slotting
  • Cross Work
    Drilling
    Off-center drilling
    Tapping
    Reaming
  • End Work
    Milling
    Drilling
    Tapping
    Reaming
    Boring

TOPSpace-Saving Design

*A and L dimensions vary depending on bar feeder type

Max. machine height: 66.5 in.

Units in inches

TOPSpecial Tools Designed for the C16 VII

The Cincom C16 VII accommodates a complete selection of live and stationary tools:

  • Gang tool post: 6 stationary + 4 rotary (3/8" square)
  • I.D. tool post: 6 front + 6 back (3.4" diam)

1/2 deceleration slitting spindle with 2" outer diameter and 4,000 rpm operating speed

End-face drilling spindle with 8,000 rpm operating speed

Adjustable angle face drilling spindle for helical interpolation and drilling inclined end faces