Marubeni Citzen-Cincom, Inc.
Products
Service, Training and Support
Sales
Applications and Information
About MCC
Request Information
Home

Cincom FL42

Fixed Headstock Turning Center for parts Φ 1.65"×3.15"

100% Servo Control

Citizen-Cincom’s 100% servo control adds advantages unavailable in other machine designs.

  • Lower Maintenance: Servos eliminate belts, hydraulics, pressure sensors and most limit switches, pneumatics, and other maintenance-intensive components. The result is fewer parts to wear, easier maintenance, and less downtime.
  • Better Performance: Fewer moving parts means less vibration and greater precision. Faster rapid traverses, higher spindle speeds, and shorter acceleration/deceleration times enhance produc-tivity, and with no belts, the Cincom FL42 is faster in the corners.
  • Reduced Space: No hydraulics and limited pneumatics, smaller electrical cabinetry, and fewer parts all contribute to the Cincom FL42’s compact design and small 90"×56" footprint.
  • Shorter Production Cycles: Servos allow shorter chip-to-chip tool changes, quicker tool replacements, high speed rapid traverses, and faster chuck open/close cycles. Time consuming chuck adjustments are also fully automated.

Space-Saving Tool Post Design

  • Unique intermediate indexing holder allows 12-station turret to mount as many as 24 tools
  • Standard VDI tooling, plus special tools previously available only for Swiss turning machines
  • Live tooling at any station
  • One turret serves both main- and sub-spindle

FEATURES:

Synchronous-Superimposed Operations
Cincom On-Line

Download the Cincom FL42 brochure:
FL42.pdf (620 KB)

Cincom FL42

Unique Cincom Tooling
Axis Movement
Specifications
Typical Parts
Space-Saving Design

Programming Convenience

  • Cincom’s On-Machine Program Check: Simulates the program in forward and reverse to help the operator detect and correct programming errors. The operator determines speed of the review, editing is possible at any point during the review.
  • Automatic Program Check Before Operation.
  • On-Machine Tool Set: Sets and resets tools to precise tolerances with a single press of a button.
  • Absolute Position Detection: Includes automatic 0-position return.
  • Machine Status Memory and Display: Following alarm signals, displays the machine status on the screen and automatically places it in memory
  • Routine Maintenance and Troubleshooting: Access to a library of maintenance procedures and frequently asked troubleshooting questions. Special requests can be emailed directly to the Cincom technical staff.
  • Operators Manuals: Complete operating, programming, and maintenance manuals available through the PC controller, eliminating problems caused by torn, soiled or missing pages.
TOPUnique Cincom Tooling

Half index front drill holder Half index front and back drill holder Face drill holder. Removable chuck can be positioned for dual front, or front-back drilling.
Half-index turning tool holder Half-index turning tool holder Adjustable angle cross drilling spindle
TOPAxis Movement

Synchronized Control: The controller synchronizes the movement of one axis with that of another (e.g. the movement of the Z1 axis of the main spindle with the
Z2 movement of the sub-spindle) by pulse input so both actions occur simultaneously.

Superimposed Control: The controller causes the movement of one axis to overlap that of another (e.g. Z1 axis motion of the main spindle overlaps the Z2 axis of the sub-spindle. The actions of Z2 will coincide with, but be independent of, the actions of Z1).

X2* and Z2* are superimposed on X1 and Z1 allowing simultaneous front and back machining.
Machine SpecificationsTOP
Simultaneously controlled axes X1, Z1, Z2, C1
Max. part diameter 1.65"
Max. part length 3.15"
Spindle motor 10/15 hp
Maximum spindle speed 6,000 rpm
Controller Cincom FL special version

TOPTypical Parts

Complex geometries for parts
to 1.65"×3.15"

  • Synchronous/superimposed machining
  • Live tooling at any station
  • 4 programmable axes

The FL42 turns, mills, drills (including adjustable-angle cross drilling), bores, chamfers, taps, slots, threads, and more. Front and back work, and multiple operations performed simultaneously.

    TOPSpace-Saving Design

    *A and L dimensions vary depending on bar feeder type

    Units in inches


    All specifications are subject to change without prior notice.

    This product is subject to the export control laws of the United States and other countries. A license may be required prior to export, re-export or transfer of these products. Contact us for further information.

    Terms and Conditions